Sunmark 5 Inch Walker Wheels - 1 EA

For safety these precautions must be taken when using this product. Before each use make sure: Walker is adjusted to correct height. Locking mechanisms and push buttons are fully engaged. Make sure the walker sits level and all legs are adjusted to an equal height. Use only as instructed by your healthcare provider. Walker wheels are to be used only on the front legs of the walker. FAILURE TO FOLLOW THE ABOVE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY. To install glide caps: Place one glide cap on each of the walker's rear footpiece rubber tips. Set the walker on the floor and place weight firmly down on the walker handles. To install walker wheels: 1. Depress push button on the walker frame and remove the two existing FRONT leg extensions from the walker. 2. Depress push button on the walker frame and install the NEW wheel attachment onto the FRONT leg of the walker. 3. Repeat step 2 for remaining FRONT leg. 4. Adjust the wheel attachment into one of the adjustment holes. Adjusting your walker: When using adjustable walkers ensure that all legs are adjusted to an equal height and that all push buttons are properly engaged. 1. Adjust the walker so that when the arm is extended the handle is at wrist height. 2. Depress the push button and slide leg up or down. 3. Engage the push button into the hole that provides correct height. 4. Repeat for each leg making sure walker is level.