Alcon Preservative-Free pH-Balanced Saline Solution - 3ea
Alcon Preservative-Free pH-Balanced Saline Solution - 3ea
- SKU: 10009129
- UPC: 30058052730
- Size: 3X4 EA
- Manufacturer: ALCON VISION CARE GRP
TITLE: Alcon Preservative-Free pH-Balanced Saline Solution - 3ea
Sterile. For rinsing after cleaning and for heat disinfection of soft (hydrophilic) contact lenses. Unisol 4 is a sterile preservative free saline solution balanced to the same pH as your eye's natural tears for superior comfort.
Please see Manufacturer's Directions for Use Instructions *
Use Unisol 4 solution only to rinse your lenses after cleaning before heat disinfection. After the lenses have been disinfected, they are ready for wear without additional rinsing. If you need to remove a lens to clean or wet it and replace it on your eye
To open container, press down on cap and turn cap clockwise. A molded piercing insert inside the cap will puncture the container. Remove cap and follow directions. Clean, rinse, and disinfect your lenses each time you remove them. Always wash your hands before holding lenses. Fill empty storage case with fresh Unisol 4. Clean and rinse one lens first (always the same lens first) and place into correct chamber of your lens case. Close chamber securely. Repeat for other lens. Disinfect according to the directions of your heat unit. See package insert for full information. Discard bottle and contents 30 days after opening. Store at room temperature. Keep tightly closed. Keep out of reach of children.
Unisol 4 is an Aqueous Solution Containing Sodium Chloride, Boric Acid, and Sodium Borate.
Safety sealed; Tamper evident. To avoid contamination and possible eye infection, do not touch the tip of this container to any surface. Should the top of any container become contaminated, discard the container and its contents. Do not transfer saline to another container. Because Unisol 4 contains no strong preservatives, it will not remain sterile indefinitely after opening and, therefore, should not be used as an eyedrop. Do not use if solution is cloudy or discolored.
