Alcon Preservative-Free pH-Balanced Saline Solution - 3ea

Use only to rinse your lenses after cleaning before heat disinfection. After the lenses have been disinfected, they are ready to wear without additional rinsing. If you need to remove a lens to clean or wet it and replace it on your eye, use a product specifically indicated for this purpose. To open container, press down on cap and turn cap clockwise. A molded piercing insert inside the cap will puncture the container. Remove cap and follow directions. Clean, rinse, and disinfect your lenses each time you remove them. Always wash and dry your hands before handling lenses. Fill empty storage case with fresh solution. Clean and rinse one lens first (always the same lens first) and place into correct chamber of your lens case. Close chamber securely. Repeat for other lens. Disinfect according to the directions of your heat unit. STORE AT ROOM TEMPERATURE. KEEP TIGHTLY CLOSED.

Sodium Chloride; Boric Acid; Sodium Borate

For your protection, this one-piece container should not be used if any leaks are present prior to opening. Leaks can be detected by removing the cap and squeezing the bottle. To avoid contamination and possible eye infection, do not touch the tip of this container to any surface. Should the top of any container become contaminated, DISCARD the container and its contents. Do not transfer saline to another container. Because this solution contains no preservatives, it will not remain sterile indefinitely after opening and, therefore, should not be used as an eyedrop. Re-use of solution or use of water with lenses may lead to contamination resulting in eye injury and potential loss of vision. See accompanying instructions for additional important safety information. DO NOT USE IF SOLUTION IS CLOUDY OR DISCOLORED. DISCARD BOTTLE AND CONTENTS 30 DAYS AFTER OPENING. KEEP OUT OF REACH OF CHILDREN.